ACDP-Solderless Programming Master

• 
  

  EEPROM Programming：

  Support 93/24/25/35/95 Series EEPROM in circuit programming (ICP) and on adapter board programming(OBP).

  BMW module Programming：

  ① Support CAS1-CAS3+ IMMO key programming and mileage reset through OBD mode.
  ② Support CAS3+/3++, CAS4/4+key programming and mileage reset by ICP.
  Data reading and writing without lifting the pin. No removing any components. Intelligent detection.
  ③ Support FEM/BDC IMMO key programming and mileage reset.Fully automatic mode matching.Safe,reliable and fast!Support FEM/BDC module restore, FEM/BDC backup and write anti-theft data at the same time.
  ④ Support key unlocking, key refresh function.
  ⑤ Repair (FRM) Footwell module data without coding.
  ⑥ Support BMW 8HP (F/G chassis) gearbox refresh. 6HP (F chassis) gearbox refresh and cloning.
  ⑦ Support CAS1-CAS4 data restore. It can modify vehicle frequency, VIN, ISN code, or replace CAS module by modifying EE data.
  ⑧ Support OBD restore CAS3/CAS3+/CAS3+ problem caused by downgrade
  ⑨ Read ISN codes of N20/N55/N13 by OBD or without openning the DME shell. Read ISN code of MSV70/MSV80/MSD80 without opening the DME shell. Read ISN code of other models (B38, etc.) by opening the shell.
  ⑩ Support instrument calibration of BMW full range.
  

  Jaguar/Land Rover KVM module Programming：

  Support Adding key and all-key-lost for new Jaguar and land rover with KVM module after year 2015.

  Porsche BCM module Programming：

  Support Adding key and all-key-lost for new Porsche after year 2010

  Volkswagen MQB module Programming：

  Support parts of VDO key programming/mileage adjustment of VW MQB platform via OBD, and Passat MMC(NEC D70F3525+95320)instrument adjustment after years 2015 by ICP mode.

  Fujitsu CPU module Programming：

  Support Fujitsu CPU MB91F(Honda Fit,KIA K3/K5,Sonata 9,etc.)Mileage adjustment.

  Function of Airbag ECU reset/maintenance reset is under development...

  Mercedes-Benz,Audi and various models is under development...

• 
  

  Change of connection mode:

  From soldering iron to solderless exclusive connector.

  Change of pin detection mode:

  From the past visual mode of detection to fully automatic intelligent detection.

  Change of service mode:

  Offline service is changed to online synchronous service.

  Change of work mode:

  Single operation is changed to team cooperation.